| 序号 |
作者姓名 |
论文名称 |
学科门类编号 |
发表年 |
刊物名称 |
论文类型编号 |
是否为SCI/SSCI源刊 |
| 1 |
邹铁方 |
车-摩托车碰撞中骑乘人员运动学响应的差异 |
02 |
2020 |
汽车安全与节能学报 |
3 |
否 |
| 2 |
邹铁方 |
汽车-摩托车碰撞事故中骑乘人员损伤差异对比研究 |
02 |
2020 |
汽车工程 |
2 |
否 |
| 3 |
邹铁方 |
New observations from real-world vehiclepedestrian collisions in reducing ground related injury by controlling vehicle braking |
02 |
2020 |
International Journal of Crashworthiness |
4 |
是 |
| 4 |
邹铁方 |
Pedestrian gaits observed from actual pedestrianvehicle collisions |
02 |
2020 |
International Journal of Crashworthiness |
4 |
是 |
| 5 |
李凤玲 |
A Firefly Algorithm with Self-adaptive Population Size for Global Path Planning of Mobile Robot |
01 |
2020/10/1 |
IEEE ACCESS |
4 |
是 |
| 6 |
苗秀娟 |
Aerodynamic Performance of a High-Speed Train Passing through Three Standard Tunnel Junctions under Crosswinds |
01 |
2020.5 |
Applied sciences |
4 |
是 |
|
| 7 |
杜荣华 |
Battery aging-and temperature-aware predictive energy management for hybrid electric vehicles
|
02 |
2020 |
JOURNAL OF POWER SOURCES |
4 |
是 |
| 8 |
杜荣华 |
Abnormal Road Surface Recognition Based on Smartphone Acceleration Sensor |
02 |
2020 |
Sensors |
4 |
是 |
| 9 |
时乐泉（导师杜荣华） |
负载扰动下永磁同步电机控制系统设计与仿真 |
02 |
2020 |
计算机仿真 |
4 |
否 |
| 10 |
毛聪 |
Effect of laser-discrete-quenching on bonding properties of electroplated grinding wheel with AISI 1045 steel substrate and nickel bond |
01 |
2020 |
Chinese Journal of Aeronautics |
4 |
是 |
| 11 |
刘鑫（Xin Liu） |
Construction of probability box model based on maximum entropy principle and corresponding hybrid reliability analysis approach |
01 |
2020 |
Structural and Multidisciplinary Optimization |
4 |
是 |
| 12 |
刘鑫（Xin Liu） |
An efficient multi-objective optimization method based on the adaptive approximation model of the radial basis function |
01 |
2020 |
Structural and Multidisciplinary Optimization |
4 |
是 |
| 13 |
刘鑫 |
基于概率-椭球混合模型的缓冲气囊防护特性可靠性分析方法 |
01 |
2020 |
机械工程学报 |
2 |
否 |
| 14 |
刘鑫 |
基于自适应代理模型的汽车乘员约束系统优化设计 |
01 |
2020 |
汽车工程 |
2 |
否 |
| 15 |
刘鑫 |
基于证据理论的机械结构高效可靠性分析方法 |
01 |
2020 |
中国机械工程 |
4 |
否 |
| 16 |
刘鑫 |
基于自适应代理模型的汽车乘员约束系统优化设计 |
01 |
2020 |
振动与冲击 |
4 |
否 |
| 17 |
胡宏伟（导师） |
Study on PCA-SAFT imaging using leaky Rayleigh waves |
01 |
2020 |
Measurement |
4 |
是 |
| 18 |
徐晓强 |
Chatter Frequency Identification and Amplitude Tracking Using Short-Time Difference Spectrum Analysis |
01 |
2020 |
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT |
4 |
是 |
| 19 |
李碧琼 |
Design and Simulation of paper roll Packaging Workstation Based on RobotStudio |
|
2019 |
Advances in Computer Science Research,Volume 94 |
4 |
否 |
| 20 |
张志勇 |
Vibration source identification of a heavy commercial vehicle cab based on operational transfer path analysis |
02 |
2020 |
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering |
4 |
是 |
| 21 |
张志勇 |
Semi‐active control of air suspension with auxiliary chamber subject to parameter uncertainties and time‐delay |
02 |
2020 |
International Journal of Robust and Nonlinear Control |
4 |
是 |
| 22 |
张志勇 |
Active cell balancing of lithium‐ion battery pack based on average state of charge |
02 |
2020 |
International Journal of Energy Research |
4 |
是 |
| 23 |
张志勇 |
考虑路面预瞄信息和参数不确定性的空气悬架半主动控制 |
02 |
2020 |
振动与冲击 |
3 |
否 |
| 24 |
李岳林 |
Intelligent prediction on air intake flow of spark ignition engine by a chaos radial basis function neural network |
01 |
2020 |
Journal of Central South University |
3 |
是 |
| 25 |
李岳林（导师） |
Predictive Control Of Transient Air-Fuel Ratio for Gasoline Engine Based on Wavelet Network Inversion |
01 |
2020 |
earth environmental science |
4 |
否 |
| 26 |
刘理(通讯作者) |
Reducing CACC Platoon Disturbances Caused by State Jitters by Combining Two Stages Driving State Recognition With Multiple Platoons' Strategies and Risk Prediction |
02 |
2020 |
IEEE Transactions on Intelligent Transportation Systems |
4 |
是 |
| 27 |
龙春光（导师） |
PEEK/ZA8复合材料的制备及力学与摩擦学性能研究 |
01 |
2020 |
中国塑料 |
3 |
否 |
| 28 |
唐宏宾 |
A fault diagnosis method for loose slipper failure of piston pump
in construction machinery under changing load |
02 |
2020 |
Applied Acoustics |
4 |
是 |
| 29 |
王方 |
A Computational Biomechanics Human Body Model Coupling Finite Element and Multibody Segments for Assessment of Head/Brain Injuries in Car-to-Pedestrian Collisions |
02 |
2020 |
International Journal of Environmental Research and Public Health |
4 |
是 |
| 30 |
吴钢 |
Effect of Acetone-n-Butanol-Ethanol (ABE) as an Oxygenate on Combustion, Performance, and Emission Characteristics of a Spark Ignition Engine |
01 |
2020 |
JOURNAL OF CHEMISTRY |
4 |
是 |
| 31 |
吴钢 |
Numerical Study on Effects of Key Factors on Performance of CeO2-based Catalyzed Diesel Particulate Filter |
01 |
2020 |
JOURNAL OF THERMAL SCIENCE |
4 |
是 |
| 32 |
吴钢 |
微粒捕集器分区域微波再生过程功率优化 |
01 |
2020 |
中南大学学报自然科学版 |
3 |
否 |
| 33 |
武和全、胡林等 |
正面碰撞中的老年驾驶员胸部响应研究 |
02 |
2020.8 |
汽车工程 |
2 |
否 |
| 34 |
武和全、胡林等 |
车辆碰撞中乘员骨盆力学响应特性的研究 |
02 |
2020.4 |
汽车工程 |
2 |
否 |
| 35 |
武和全 |
Occupant kinematics and biomechanics during frontal collision in autonomous vehicles—can rotatable seat provides additional protection? |
02 |
2020.1 |
Computer Methods in Biomechanics and Biomedical Engineering |
4 |
是 |
| 36 |
武和全 |
Verification and injury risk study of FE model of upper limbs in elderly under dynamic loading |
02 |
2020.4 |
Multimedia Tools and Applications |
4 |
是 |
| 37 |
易可夫 |
Regularized Matrix Completion with Partial Side Information |
01 |
2020 |
Neurocomputing |
4 |
是 |
| 38 |
张健 |
Catalytic effect and mechanism of NiCu solid solutions on hydrogen storage properties of MgH2 |
01 |
2020 |
Renewable Energy |
4 |
是 |
| 39 |
张健(导师) |
Adsorption and diffusion behaviors of Ni-based filler elements on diamond surface |
01 |
2020 |
Journal of Alloys and Compounds |
4 |
是 |
| 40 |
张健(导师) |
Modifying effects and mechanisms of graphene on dehydrogenation properties of sodium borohydride |
01 |
2020 |
Journal of Materials Science |
4 |
是 |
| 41 |
张健(导师) |
冷冻干燥法制备有机蒙脱土及其改性沥青性能研究 |
01 |
2020 |
材料导报 |
4 |
否 |
| 42 |
周小杰 |
Improved workability for Mg-Y-Zn alloys via increased volume fraction of block LPSO phases |
01 |
2020 |
Materials Science and Engineering: A |
4 |
是 |
| 43 |
周振华 |
The design of linear magnetic negative stiffness element for engineering applicationusing rectangular permanent magnets |
02 |
2020 |
Journal of Magnetics |
4 |
是 |
| 44 |
周振华 |
基于负刚度结构的低频速度传感器的设计与分析 |
02 |
2020 |
传感技术学报 |
3 |
否 |
| 45 |
周振华 |
基于双环永磁体结构的多稳态能量采集器的建模及性能分析 |
02 |
2020 |
噪声与振动控制 |
4 |
否 |
| 46 |
周振华 |
基于负刚度磁弹簧的超低频振动速度传感器的设计与性能分析 |
02 |
2020 |
仪表技术和传感器 |
4 |
否 |
| 47 |
周振华（通讯） |
An efficient multi-objective optimization method based on the adaptive approximation model of the radial basis function |
01 |
2020 |
Structural and Multidisciplinary Optimization |
4 |
是 |
| 48 |
胡林 |
A Study on Correlation of Traffic Accident Tendency with Driver Characters using in-depth Traffic Accident Data |
02 |
2020 |
Journal of Advanced Transportation |
4 |
是 |
| 49 |
胡林 |
Casualty risk of e-bike rider struck by passenger vehicle using China in-depth accident data |
02 |
2020 |
Traffic Injury Prevention |
4 |
是 |
| 50 |
胡林 |
Investigation of clusters and injuries in pedestrian crashes using GIS in Changsha, China |
02 |
2020 |
Safety Science |
4 |
是 |
| 51 |
胡林 |
Reliable state of charge estimation of battery packs using fuzzy adaptive federated filtering |
02 |
2020 |
Applied Energy |
4 |
是 |
| 52 |
胡林 |
The injury epidemiology of adult riders in vehicle-two-wheeler crashes in China, Ningbo, 2011-2015 |
02 |
2020 |
Journal of Safety Research |
4 |
是 |
| 53 |
胡林 |
A Review of Research on Traffic Conflicts Based on Intelligent Vehicles |
02 |
2020 |
IEEE Access |
4 |
是 |
| 54 |
胡林 |
年龄因素对行人下肢损伤的影响研究 |
02 |
2020 |
机械工程学报 |
2 |
否 |
| 55 |
胡椰姿（导师：胡林） |
A Review of Research on Traffic Conflicts Based on Intelligent Vehicles Perception Technology |
02 |
2020 |
ICACMVE 2019 |
4 |
否 |
| 56 |
胡林（通讯作者） |
Study on the Driving Style Adaptive Vehicle Longitudinal Control Strategy |
02 |
2020 |
IEEE/CAA Journal of Automatica Sinica |
4 |
是 |
| 57 |
黄浩铭等 |
Broadband Radar Absorbing Performance of Corrugated Structure |
02 |
2020 |
Composite Structures |
4 |
是 |
| 58 |
黄浩铭等 |
Broadband radar absorbing characteristic based on periodic hollow truncated cone structure |
02 |
2020 |
Physica B: Condensed Matter |
4 |
是 |
| 59 |
张鹏 |
基于近似测地线的分层次自动铺带轨迹规划方法 |
02 |
2021 |
机械工程学报 |
2 |
否 |
| 60 |
伍文广 |
Collaborative Optimization of Nonlinear Hydropneumatic Suspension Dynamic Characteristics |
01 |
2020 |
Journal of Testing and Evaluation |
4 |
是 |
| 61 |
伍文广 |
High-Precision Dynamics Characteristic Modeling Method Research considering the Influence Factors of Hydropneumatic Suspension |
01 |
2020 |
Shock and Vibration |
4 |
是 |
| 62 |
伍文广 |
Adaptive Cruise Control Strategy Design with Optimized Active Braking Control Algorithm |
01 |
2020 |
Mathematical Problems in Engineering |
4 |
是 |
| 63 |
李奇奇 |
Design of resonant structures in resin matrix to mitigate the blast wave with a very wide frequency range |
01 |
2020 |
Smart Materials and Structures |
4 |
是 |
| 64 |
李奇奇 |
The feedback artificial tree (FAT) algorithm |
01 |
2020 |
Soft Computing |
4 |
是 |
| 65 |
李奇奇 |
Development of a multi-objective artificial tree (MOAT) algorithm and its application in acoustic metamaterials |
01 |
2020 |
Memetic Computing |
4 |
是 |
| 66 |
雷正保 |
Topology optimization for crashworthiness
of cyclic symmetric isosceles under dynamic
response constraints |
02 |
2020 |
International Journal of Crashworthiness |
4 |
是 |
| 67 |
雷正保（导师） |
A Sigmoidal and Distance Combined Transformation Method for Nearly Singular Integral on Asymmetric Patch |
02 |
2020 |
Symmetry |
4 |
是 |
| 68 |
雷正保（导师） |
Multi-Objective Robust Design of New Rotate Barrel Based on Satisfaction Function |
02 |
2020 |
Technical Gazette |
4 |
是 |
| 69 |
雷正保 |
独立桩抗撞结构的碰撞相容性优化设计方法 |
02 |
2020 |
机械工程学报 |
2 |
否 |
| 70 |
雷正保 |
基于碰撞安全性的可导向防撞垫设计 |
02 |
2020 |
机械强度 |
3 |
否 |
| 71 |
雷正保 |
汽车多元动态系统仿真模型响应分析方法 |
02 |
2020 |
汽车技术 |
3 |
否 |
| 72 |
雷正保 |
TB级可导向防撞垫吸能盒拓扑优化设计 |
02 |
2020 |
机械强度 |
3 |
否 |
| 73 |
雷正保（导师） |
基于耐撞性拓扑优化的防撞垫吸能盒稳健性设计 |
02 |
2020 |
机械强度 |
3 |
否 |
| 74 |
雷正保 |
抗撞结构桩基关系研究的不足与措施 |
02 |
2020 |
公路交通科技 |
3 |
否 |
| 75 |
雷正保 |
公路安全防护技术研究动态与趋势 |
02 |
2020 |
公路工程 |
4 |
否 |
| 76 |
雷正保（导师） |
折臂式随车起重机转台的拓扑优化设计 |
02 |
2020 |
现代制造工程 |
4 |
否 |
| 77 |
雷正保（导师） |
高空作业飞机除冰车调平机构优化设计 |
02 |
2020 |
工程机械 |
4 |
否 |
| 78 |
雷正保（导师） |
飞机除冰车变幅机构铰点位置多目标优化设计 |
02 |
2020 |
机械设计 |
4 |
否 |
| 79 |
蒋仁言 |
A standard-based approach for multi-criteria performance evaluation of engineered systems |
04 |
2020 |
Reliability Engineering and System Safety |
4 |
是 |
| 80 |
蒋仁言 |
A novel MTTF estimator and associated parameter estimation method on heavily censoring data. |
04 |
2020 |
Quality and Reliability Engineering International |
4 |
是 |
| 81 |
蒋仁言 |
A novel parameter estimation method for the Weibull distribution on heavily censored data |
04 |
2020 |
Proc IMechE Part O: Journal of Risk and Reliability |
4 |
是 |
| 82 |
蒋仁言 |
A novel two-fold sectional approximation of renewal function and its applications |
04 |
2020 |
Reliability Engineering and System Safety |
4 |
是 |
| 83 |
蒋仁言 |
Two approximations of renewal function for any arbitrary lifetime distribution. |
04 |
2020 |
Annals of Operations Research |
4 |
是 |
| 84 |
蒋仁言 |
Estimating MTTF of a component based on spare parts consumption data. |
04 |
2020 |
Engineering Assets and Public Infrastructures in the Age of Digitalization, Chapter 60 |
4 |
是 |
| 85 |
蒋仁言 |
A simple and accurate approximation to renewal function of gamma distribution. |
04 |
2020 |
Handbook of Performability Engineering, Springer, chapter 24 |
4 |
是 |
| 86 |
蒋仁言 |
A practicalapproximation of Weibull renewal function for solving relevant optimization problems |
04 |
2020 |
Quality Engineering |
4 |
是 |
| 87 |
张明军 |
Understanding root humping in high-power laser welding of stainless steels: a combination approach |
02 |
2020 |
The International Journal of Advanced Manufacturing Technology |
4 |
否 |
| 88 |
张明军 |
Optimization of the Fibre Laser Welding of Galvanized Steel in a Lap Joint Confguration |
02 |
2020 |
Lasers in Engineering |
4 |
否 |
| 89 |
贺湘宇 |
The applications of energy regeneration and conversion technologies based on hydraulic transmission systems: A review |
02 |
2020 |
Energy Conversion and Management |
4 |
是 |
| 90 |
贺湘宇 |
Overview of applications of the sensor technologies for construction machinery |
02 |
2020 |
IEEE Access |
4 |
是 |
| 91 |
唐昆 |
3D打印制备各向异性超疏水功能表面的定向输送性能 |
02 |
2020 |
表面技术 |
3 |
否 |
| 92 |
唐昆 |
不同退火温度下 a-C:Si 涂层的热稳定性研究 |
02 |
2020 |
表面技术 |
3 |
否 |
| 93 |
胡永乐 |
First-principle calculation investigation of NbMoTaW based refractory high entropy alloys |
01 |
2020 |
Journal of Alloys and Compounds |
4 |
是 |
| 94 |
仝永刚 |
Carbon fiber reinforced ZrC based ultra-high temperature ceramic matrix composite subjected to laser ablation: Ablation resistance, microstructure and damage mechanism |
01 |
2020 |
Ceramics International |
4 |
是 |
| 95 |
仝永刚 |
Influence of alloying elements on mechanical and electronic properties of NbMoTaWX (X=Cr, Zr, V, Hf and Re) refractory high entropy alloys |
01 |
2020 |
Intermetallics |
4 |
是 |
| 96 |
仝永刚 |
Titanium alloying enhancement of mechanical properties of NbTaMoW refractory high-Entropy alloy: First-principles and experiments perspective |
01 |
2020 |
Journal of Alloys and Compounds |
4 |
是 |
| 97 |
陈小敏 |
An enhanced Johnson–Cook model for hot compressed A356 aluminum alloy |
02 |
2020 |
Advanced engineering materials |
4 |
是 |
| 98 |
何建军 |
Quick and Highly Efficient Modal Analysis Method Based on the Reanalysis Technique for Large Complex Structure and Topology Optimization |
02 |
2020 |
INTERNATIONAL JOURNAL OF COMPUTATIONAL METHODS |
4 |
是 |
| 99 |
刘鹏 |
Analysis on Dynamic Response Characteristics of High-Speed Solenoid Valve for Electronic Control Fuel Injection System |
02 |
2020 |
Mathematical Problems in Engineering |
4 |
是 |
| 100 |
尹来容 |
A solution-region approach for synthesis linkages with coincident intantaneous center and one fixed pivot |
02 |
2020 |
Journal of Mechanical Science and Technology |
4 |
是 |
| 101 |
高凯 |
A Review of Research on Intersection Control Based on Connected Vehicles and Data-Driven Intelligent Approaches |
02 |
2020 |
Electronics |
4 |
是 |
| 102 |
高凯 |
An Integrated Algorithm for Intersection Queue Length Estimation Based on IoT in a Mixed Traffic Scenario |
02 |
2020 |
Applied Sciences |
4 |
是 |
| 103 |
高凯（导师） |
Driving Intention Oriented Real-time Energy
Management Strategy for PHEV in Urban V2X
Scenario |
02 |
2020 |
iThings 2020 |
4 |
否 |
| 104 |
周振华 |
Design and experimental validation of a vibration isolator with high-static-low-dynamic-stiffness and operating point variable property |
02 |
2020 |
Journal of Vibration and Control |
4 |
是 |
| 105 |
刘志强 |
路面附着系数的自适应衰减卡尔曼滤波估计 |
02 |
2020 |
中国公路学报 |
2 |
否 |
| 106 |
侯志祥 |
The maximum power tracking of variable step fuzzy logic control based on power prediction |
02 |
2020 |
Int. J. Power Electronics, |
4 |
否 |
| 107 |
贺尚红 |
非等分叶片间距叶片式机油泵的内流场分析与试验研究 |
02 |
2020 |
华南理工大学学报（自然科学版） |
3 |
否 |
| 108 |
武和全 |
Head injury of CHARM-70 FE model and a
comparative study with Hybrid III and GHBMC model |
2 |
2020.11 |
International Journal ofVehicleSafety |
4 |
EI |
| 109 |
武和全 |
老年乘员在自动驾驶车辆中的碰撞响应研究 |
2 |
2020.6 |
机械工程学报 |
2 |
EI |
| 110 |
贺尚红 |
Performance prediction and experimental
study of variable displacement vane oil pump |
02 |
2020 |
The Journal of Engineering |
4 |
否 |
| 111 |
杜荣华 |
评《思想政治理论课教学科研分析报告(2017)》 |
19 |
2020 |
科研管理 |
6 |
11 |
| 112 |
唐宏宾 |
地方高校机械类专业新工科人才培养模式改革探索与实践 |
19 |
2020 |
科教导刊 |
7 |
5 |
| 113 |
张旭 |
“汽车营销学”课程融合思政内容教学改革与实践 |
19 |
2020 |
科学咨询 |
7 |
|
| 114 |
武和全 |
以工程应用能力为导向的独立学院汽车服务工程专业人才培养模式研究 |
19 |
2020 |
科教导刊 |
7 |
5 |
